Semi Auto Gluer Machine
Semi Auto Gluer Machine is the last process of carton forming equipment. It is suitable for corrugated cardboard with three layers and five different sizes (if seven layers are bonded, it can be processed), with high production efficiency, beautiful cardboard, less glue consumption and low cost10 It is an ideal equipment for exporting high-grade carton processing.
Product Description
Semi Auto Gluer Machine is the last process of carton molding equipment, suitable for three layers five different size of corrugated cardboard (if bonding seven layers, can do processing), high production efficiency, the cardboard is beautiful, the biggest advantage consumption less adhesive, cost is less than 10 times, and bonding, convenient operation, power saving, smooth operation, is the ideal equipment for export high-grade carton processing. This machine is considered to be semi-automatic because they require human intervention to load the materials and monitor the process, but they automate the gluing and folding stages of production.
Features of Semi Automatic Folder Gluer
1. Flat correction:
After coating, the adhesion is smooth and firm.
Install an automatic correction device to make the carton have the correct size, and effectively avoid the adhesive part (slot) blade phenomenon.
Air-drying function of the fan.
Count output equipment, equipped with photoelectric response mechanism, when reaching the fixed carton, automatic output.
2. Three lateral output
The horizontal output works automatically after pressing the receiving count and output signal, and the stacking code is convenient to bundle.
3. Our Semi Auto Gluer Machine needs less space
Overall dimension is 5500 x 1800 x 2000, needs less space.
4. High production efficiency
Mechanical speed: 40 (piece of \ points) ,high productivity
Technical Parameter of Semi Auto Gluer Machine
|
Maximum size (length + width) (mm) |
2800 |
|
Minimum size (long + width) (mm) |
340 |
|
Maximum size (width + height) (mm) |
1515 |
|
Minimum size (width + height) (mm) |
250 |
|
Feed Paper-Height (mm) |
900 |
|
power of motor (kw) |
2.3 |
|
Mechanical weight (kg) |
2000 |
|
Mechanical speed (piece of \ points) |
40 |
|
Overall dimension (mm) long X wide X high |
5500 x 1800 x 2000 |
Structure and working principle:
Rack, lifting table, front section conveying device, middle section conveying device, rear section transverse conveying device, paper receiving table, electrical control device
Put the glue into the paste bucket, press the switch button of each part, when the machine runs normally, open the switch on the bottom of the bucket, smooth flow to the paste head, according to the operation requirements to push the carton, make the carton side through the paste head at the bottom of the uniform adhesive, after the other side through the paste head, after pressing device, can be closely bonded with the surface of the adhesive together, in the middle of the pressing device, so as to achieve the purpose of bonding.
Deflection correction function: motor drive movable plate, effectively solve the problem of scissors mouth.
Other instructions:
In addition to the fan and lifting motor, all use Shanghai Otter gear deceleration motor
Semi auto gluer machine uses famous brand electrical appliances: Chint contactor, Chint travel switch, Autonix photoelectric, Xinling counter
All the belts of this machine use Tianjin Shibek honorary products
The paste head adopts Taiwan Tangcheng technology (copper paste head produced in Guangdong), which is corrosion resistant, wear resistant and easy to clean
All solid shafts of this Semi Auto Gluer Machine use high precision linear optical shaft, permanent rust
View More
